Company History and Milestones

Founded in 1993, Sino East Steel started as a regional pipe manufacturer in Tianjin at a time when Chinese steelmaking was just beginning to serve international markets. The early years built the core skills that still define the company today: controlled welding processes, precise dimensioning and honest delivery promises. As the Chinese steel industry modernised, the company invested step by step in new production capacity rather than expanding through trading.

Since 2005 we have operated under a certified export quality system with ISO 9001:2015 management and independent audits by SGS and TUV Rheinland. The factory added ERW pipe mills, a hot-dip galvanizing line, coil slitting and cut-to-length processing, and later a PPGI/PPGL colour coating line and roll-forming equipment for roofing profiles and scaffolding components. Each investment was made to close the gap between raw coil and finished, export-ready product — so that buyers receive complete control, consistent quality and traceable documentation from one manufacturer.

Today the export record covers more than 50 countries. In the EAEAEU region, we supply distributors and contractors in Russia, Belarus and Kazakhstan, with product, documentation and packing tailored to EAEAEU requirements. The same factory that serves the Middle East energy sector delivers certified pipes and coils to St. Petersburg and Novorossiysk on a regular shipping schedule — proof that scale, quality and service can grow together.

Our Manufacturing Base in Tianjin

Our production complex in Daqiuzhuang Industrial Park, Jinghai District, is a complete steel processing campus rather than a single production line. This is important for CIS buyers because it means one supplier can cover pipes, coils, sheets and scaffolding systems — and every stage, from raw coil to finished, packed-for-export product, happens under one roof with a single quality system.

The main production equipment includes ERW (electric resistance welded) pipe mills for round, square and rectangular tubes, SSAW and LSAW lines for large-diameter line pipe, a hot-dip galvanizing line that dips finished pipe and tube into molten zinc, continuous coil processing lines with slitting and cut-to-length, a PPGI/PPGL colour coating line for pre-painted coils, and roll-forming lines for corrugated roofing sheets, purlins and scaffolding components. Seamless pipe is produced by our long-term partner mills in Tianjin and Hebei under our own inspection and testing control.

Because the factory controls the processing route, we can adjust galvanizing coating weights, cut custom lengths, apply end caps and protective wrapping, and pack bundles to the exact handling requirements of your warehouse or project site.

Production Lines and Capabilities

• ERW pipe mills: round pipe and square/rectangular tube from 21.3 mm to 660 mm, wall thickness 0.8–20 mm
• SSAW / LSAW line: large-diameter line pipe up to 1,220 mm for water, gas and oil transmission
• Hot-dip galvanizing line: coating weights from 40 to 600 g/m² per EN ISO 1461 and ASTM A123
• Coil processing: slitting, cut-to-length and recoiling of HR, CR, galvanized and pre-painted strip
• PPGI / PPGL coating: pre-painted coils in a wide colour range for roofing and cladding
• Roll forming: corrugated sheets, purlins, scaffolding planks and accessory profiles

Production Lines and Capabilities

Industries We Serve

Our products go into projects that Russian contractors, utilities and manufacturers run every day. The common thread is predictable quality: material that meets the standard, documentation that satisfies customs and quality departments, and delivery that arrives on the promised date.

• Construction and civil engineering: structural pipe, square and rectangular tubes, angles, reinforcement bar and scaffolding systems for residential, commercial and industrial projects.
• Water and heating infrastructure: galvanized and black pipe for water supply, heating systems, greenhouses and agricultural irrigation networks.
• Energy and utilities: API 5L and seamless line pipe for gas, oil and district heating projects, with EN 10204 3.1 certification on every length.
• Roofing and cladding: PPGI coils, corrugated sheets and accessories for industrial halls, warehouses, farm buildings and logistics centres.
• General manufacturing: cold-rolled steel, HR sheets, wire, nails and tinplate for production lines, packaging and light engineering.
• Oil and gas: line pipe and seamless pipe supplied with third-party inspection and full batch traceability for demanding energy projects.

Our catalogue covers the full range of products that Russian importers and contractors buy most often. All items are manufactured to international standards with mill test certificates, and can be combined in mixed containers to reduce your freight cost per tonne.

Steel Pipes and Tubes

Galvanized, seamless, welded and API 5L line pipe in round, square and rectangular sections. Typical applications in Russia include water supply, heating, fencing, greenhouses, scaffolding, handrails, structural frames and oil & gas projects. Standards: ASTM A53, A106, A500, API 5L, EN 10219, EN 10255, BS 1387, DIN 2440.

• Galvanized Steel Pipe — hot-dip galvanized round pipe, 21.3–219.1 mm
• Seamless Steel Pipe — ASTM A106 / API 5L seamless, up to 406.4 mm
• Welded Steel Pipe — ERW and SSAW welded pipe for structural and line use
• API 5L Line Pipe — grades B to X70, PSL1 and PSL2, up to 1,220 mm
• Square & Rectangular Tubes — 20×20 to 200×200 mm, black or galvanized

Coils and Sheets

Hot-rolled, cold-rolled, galvanized and pre-painted coils and sheets for roofing, cladding, ductwork, profiling and general manufacturing. Standards: ASTM A653, EN 10130, EN 10346, EN 10169, JIS G3141, JIS G3303.

• Galvanized Steel Coils — continuous galvanizing, 3–15 t coils
• PPGI Coils — pre-painted colour coated coils for roofing and cladding
• Corrugated Roofing Sheets — profiled sheets in standard profiles
• Steel Sheets — HR and CR sheets, cut-to-length service
• Cold Rolled Steel — precision strip and sheet for manufacturing

Structures, Scaffolding and Special Products

In addition to pipes and coils we produce complete scaffolding systems, structural profiles, reinforcement bar, stainless steel, wire, nails and tinplate — the supporting products that make one-stop procurement possible for Russian distributors.

• Scaffolding — Ringlock, Cuplock, frame systems and accessories to EN 39 / BS 1139
• Equal Angle Steel — structural angles, EN 10056 / ASTM A36
• Deformed Steel Bar — ASTM A615 Grade 60 reinforcement
• Stainless Steel — grades 304, 304L, 316, 316L
• Steel Wire and Steel Nails — galvanized and reinforcement
• Electrolytic Tinplate — food-grade packaging material
• Prefabricated Houses — modular structures for site and industrial use

Quality Control and Certification

Quality is the foundation of our export business. The factory operates under an ISO 9001:2015 quality management system and is independently audited by SGS and TUV Rheinland for production capacity and export reliability. Every batch of material passes through a documented inspection routine: chemical composition analysis, tensile and yield testing, dimensional checks and, where applicable, hydrostatic or flattening tests on pipe.

Each consignment ships with an EN 10204 3.1 mill test certificate (MTC) showing heat numbers and test results, together with batch traceability records. This makes incoming inspection at St. Petersburg, Novorossiysk, Vladivostok or any other port straightforward for your quality department and customs broker. If your project requires independent verification, we arrange pre-shipment inspection by SGS, TUV or Bureau Veritas, with the report issued in English before the vessel departs.

Standards We Manufacture To

• Pipes: ASTM A53, A106, A500, API 5L, EN 10219, EN 10255, EN 10210, EN 39, BS 1139, BS 1387, DIN 2440, ISO 1461
• Coils and sheets: ASTM A653, A792, A240, A312, EN 10130, EN 10169, EN 10346, EN 10244, JIS G3141, JIS G3303
• Reinforcement and profiles: ASTM A615, ASTM A36, EN 10056, JIS G3192, GB standards
• Galvanizing: EN ISO 1461 hot-dip coating, coating weights 40–600 g/m²

Export Process and Logistics to Russia

Importing steel from China to Russia is a routine process when you work with a manufacturer that has done it hundreds of times. Our export workflow is designed to be transparent and easy to follow, whether this is your first container or your fiftieth.

How an Order Works

1. Specification and quotation. Send your required standard, grade, size, quantity and destination port by email or WhatsApp. You receive a firm factory quotation within 24 hours.
2. Sample and approval. For new products we can supply samples or cut pieces so your quality department can verify the material before mass production.
3. Production. Your order enters the production schedule, and our QC team issues inspection records at each stage.
4. Inspection and loading. Optional third-party inspection before loading; we then book the vessel from Tianjin or Xingang port.
5. Shipping and documents. The full document set — commercial invoice, packing list, bill of lading, certificate of origin and EN 10204 3.1 mill certificates — is sent before arrival.

Shipping to Russian and CIS Ports

We ship FOB Tianjin/Xingang, CFR or CIF to St. Petersburg, Novorossiysk, Vladivostok and other ports, and DDP solutions are available for regular customers. Typical lead time from order confirmation to the destination port is 15–25 days. FCL and LCL options are both available; for distributors who combine several product lines, mixed-container consolidation lowers the freight cost per tonne and keeps your warehouse stocked with a wider range. We work with T/T, L/C at sight and D/P payment terms, and for long-term CIS partners project-based payment arrangements can be discussed.

Why CIS Buyers Choose Sino East Steel

Russian importers evaluate suppliers on four things: price competitiveness after freight, quality that meets international standards, documentation that clears customs without surprises, and delivery dates that hold. Our manufacturing model is built around all four.

• Factory-direct pricing. You buy from the manufacturer, not through a trading chain, which protects your margin in the Russian market.
• One-stop supply. Pipes, coils, sheets, scaffolding and accessories from a single source — one contract, one document set, one contact person.
• Complete documentation. EN 10204 3.1 mill certificates, certificates of origin and export paperwork prepared for smooth EAEAEAEU clearance.
• International standards. Regular production to EN, DIN and BS specifications, in addition to ASTM and API.
• Responsive communication. Quotations within 24 hours, with a dedicated export manager who knows your orders and history.
• Technical support and after-sales. Our engineers advise on grade selection, coatings, packing and storage; batch records remain on file after delivery.
• Flexible quantities. Full-container, mixed-container and trial order options, with long-term supply programmes for monthly buyers.

Contact Our Export Team

We welcome enquiries from Russian and CIS importers, distributors, contractors and manufacturers. Send your specification and destination port, and you will receive a factory-direct quotation within 24 hours.

• Email: [email protected]
• WhatsApp / WeChat: +86-186-2208-8833
• Telephone: +86-22-68581698 / +86-22-68961006
• Skype: paulpaul120481
• Address: Daqiuzhuang Industrial Park, Jinghai, Tianjin, China

Use the contact form or reach us directly — our export team is ready to support your next steel project in Russia.

{ “@context”: “https://schema.org”, “@type”: “Organization”, “name”: “Sino East Steel Group”, “url”: “https://sesteel.ru”, “logo”: “https://sesteel.ru/wp-content/uploads/2026/08/sinoeast-plant-banner.jpg”, “foundingDate”: “1993”, “email”: “[email protected]”, “telephone”: “+86-22-68581698”, “address”: {“@type”: “PostalAddress”, “streetAddress”: “Daqiuzhuang Industrial Park, Jinghai”, “addressLocality”: “Tianjin”, “addressCountry”: “CN”}, “sameAs”: [“https://wa.me/8618622088833”] }