Equal Angle Steel 50x50x5 mm

50×50 angle, the most commonly stocked size for structural bracing and frames.

Equal Angle Steel 50x50x5 mm is manufactured at our ISO 9001:2015 certified plant in Tianjin, China (65,000 m², 500,000 t annual capacity) and exported directly to Russia, Kazakhstan, Uzbekistan, Kyrgyzstan, Tajikistan, Turkmenistan and Belarus since 2005. Every batch ships with a Mill Test Certificate (MTC) per EN 10204 3.1 with heat number traceability, the Certificate of Origin (form ST-1 for the EAEU) and full export documentation.

Equal Angle Steel 50x50x5 mm from the Tianjin plant – MTC per EN 10204 3.1, delivery to Russia and Central Asia

What Is Equal Angle Steel 50x50x5 mm?

50×50 angle, the most commonly stocked size for structural bracing and frames.

Equal Angle Steel 50x50x5 mm is supplied to ASTM A36, EN 10056 in grades Q235, Q345, S355, covering 50x50x5-6 mm, 6/12 m, with Black, bare finish. The material is produced under a strict quality management system, tested to the requirements of the applicable standard and documented with the full certificate set required for import into Russia, Kazakhstan, Uzbekistan, Kyrgyzstan, Tajikistan, Turkmenistan and Belarus. As a factory-direct exporter with an annual capacity of 500,000 tonnes, we supply this product line to distributors, project contractors and industrial end-users across the EAEU, with scheduled deliveries and fixed-price contracts for regular buyers.

Key Features of Equal Angle Steel 50x50x5 mm

• Supplied to ASTM A36, EN 10056 with a full Mill Test Certificate per EN 10204 3.1 including chemical composition and mechanical properties
• Available grades: Q235, Q345, S355
• Size range: 50x50x5-6 mm, 6/12 m
• Surface and finish: Black, bare
• MOQ: 25 t; trial containers and consolidated shipments available for first orders
• Production time 15-25 days after specification confirmation; delivery to Russia and Central Asia 25-45 days
• Third-party inspection by SGS, Bureau Veritas or TUV Rheinland available before shipment
• GOST-equivalent documentation and EAC certification support prepared for EAEU customs clearance

Equal Angle Steel 50x50x5 mm – Specifications

Grades, Standards and GOST Equivalents

Equal angles are supplied to ASTM A36, EN 10056 (S235JR-S355JR), GB 9787 (Q235, Q345) and GOST 8509 (St3, 09G2S). For the Russian market GOST 8509 is the governing standard, with St3 for general structures and 09G2S for low-temperature service, and we prepare certificates cross-referencing the international grade. Sizes from 20x20x3 to 200x200x20 mm in 6 m and 12 m lengths, black or hot-dip galvanized per ISO 1461. The combination of grade, size and certification makes direct mill supply valuable for structural steel suppliers and fabricators across the EAEU.

Manufacturing Process

Equal angle steel is produced by hot rolling: billets are reheated and rolled through a series of passes on a section mill, forming the two equal legs with a sharp or rounded corner, then cooled on a cooling bed, straightened and cut to length. Angles from 20x20x3 to 200x200x20 mm are supplied in 6 m and 12 m lengths, in Q235, Q345, A36, S275 and S355 grades. The rolling process controls the leg dimensions, thickness and corner radius within the tolerances of GB 9787, EN 10056 or GOST 8509. Galvanized angles are hot-dip coated per ISO 1461 after rolling for outdoor service. Each batch is tested for chemical composition and mechanical properties (yield, tensile, elongation), with the MTC issued per EN 10204 3.1 and GOST 8509 cross-reference for the Russian market.

Applications

• Steel structures and frames
• Brackets, supports and bracing
• Towers, masts and transmission structures
• Machinery bases and frames
• Fencing and gates

Applications in Steel Structures and Industry

Equal angle steel is the most widely used section in light and medium steel structures. Fabricators use angles for frames, bracing, brackets and supports in industrial buildings, mezzanines and equipment. Transmission tower and mast manufacturers consume angles in large volumes for lattice structures. The solar mounting sector uses galvanized angles for support structures, where the HDG coating ensures long service life. Machinery builders use angles for equipment frames and bases. In the agricultural sector, angles form the frames of greenhouses, livestock buildings and storage facilities. With the GOST 8509 grade mapping, Russian and Kazakh fabricators can source angles directly for projects designed to domestic standards, including 09G2S for cold-climate structures.

Quality Control and Testing

Every production stage at the Sino East Steel plant is controlled under an ISO 9001:2015 quality management system. Depending on the product, each batch is tested for chemical composition and mechanical properties (yield strength, tensile strength, elongation), dimensional accuracy, surface quality and, where applicable, hydrostatic pressure, weld seam integrity, zinc coating thickness and paint adhesion. All testing is performed in our laboratory and, when the project requires, witnessed by independent inspectors from SGS, Bureau Veritas or TUV Rheinland. Each shipment is accompanied by a Mill Test Certificate (MTC) per EN 10204 3.1 with heat numbers, so every tonne can be traced back to its production date, heat and chemical analysis. This documentation is prepared in a form accepted by customs authorities in Russia, Kazakhstan, Uzbekistan, Kyrgyzstan, Tajikistan, Turkmenistan and Belarus, and can be adapted to GOST-based reporting when the buyer’s quality department requires it.

Documents and Compliance for Russia and the EAEU

All goods are supplied with a complete export documentation set prepared for smooth customs clearance in the Russian Federation and the Eurasian Economic Union: Mill Test Certificate (MTC) per EN 10204 3.1 with heat numbers and chemical analysis, Certificate of Origin form ST-1 (which qualifies for duty-free import within the EAEU), commercial invoice, packing list and bill of lading or railway consignment note. Where the project is subject to the EAEU Technical Regulations, we support the EAC certification process and provide the technical passport, test reports and conformity documentation required by the importing party. For products supplied against Russian design standards we prepare documentation referencing the relevant GOST equivalents (for example GOST 3262 for galvanized pipe, GOST 8732 for seamless pipe, GOST 30245 for hollow sections), so your quality department and the customs broker receive everything on the day the vessel or train arrives.

Logistics to Russia and Central Asia

Sea freight from Tianjin and Xingang ports to St. Petersburg, Novorossiysk, Vladivostok and the Baltic ports takes 30-45 days, with container and break-bulk options for project volumes. For Central Asia we ship container rail trains via the Dostyk and Khorgos border crossings to Almaty, Astana, Tashkent, Samarkand, Bishkek, Osh, Dushanbe and Ashgabat in 25-40 days. We quote on FOB Tianjin/Xingang, CFR, CIF, or DAP terms to your warehouse, consolidate several product lines in one container to reduce the freight cost per tonne, and agree the shipment schedule with your project calendar. A Russian-speaking sales team follows your order from specification to customs clearance, prepares the transit documentation for rail corridors, and coordinates with your forwarding agent at the destination. For regular buyers we offer scheduled programs with fixed prices for the contract period, protecting your project budget from market volatility.

Packaging and Loading

Angles are packed in bundles with steel strapping and dunnage, labeled with the standard, grade, size, length and weight. Bundles of 6 m or 12 m lengths are loaded into containers with a calculated stowage plan; longer sections ship in flat racks or open-top containers. Galvanized angles are packed with surface protection. The documentation – MTC per EN 10204 3.1 with GOST 8509 cross-reference, ST-1 certificate, invoice and packing list – is prepared for EAEU customs clearance.

The Angle Market in Russia and Central Asia

Equal angle steel is a staple of the structural steel trade in Russia and Central Asia. Steel service centers stock angles as a core product for fabricators, and construction of industrial buildings, logistics centers and agricultural facilities drives steady demand. The solar mounting sector in Kazakhstan and Uzbekistan adds demand for galvanized angles. Transmission and tower construction consumes large angles in project volumes. Because domestic section mills focus on standard sizes, the market for galvanized angles, 09G2S grade and specific sizes is partly supplied by imports. Sino East Steel supplies angles directly to service centers, fabricators and solar EPC contractors across the EAEU.

How to Choose the Right Equal Angle

Select the size by the structural load: 20-40 mm for light brackets and trim, 50-63 mm for general frames and bracing, 100 mm+ for heavy structures and towers. Choose the grade by the design temperature: Q235/A36/St3 for general service, Q345/S355 for higher loads with lower weight, 09G2S for welded structures in cold climates. For outdoor and solar mounting applications specify hot-dip galvanized angles per ISO 1461. Confirm the length (6 m or 12 m) and the certificate format with your fabricator. For Russian projects confirm the GOST 8509 cross-reference in the MTC.

Why Buy Equal Angles Direct from the Factory

Sino East Steel supplies angles from partner section mills under our own quality control, with MTC per EN 10204 3.1 and GOST 8509 grade mapping. Factory-direct pricing and consolidated shipments of several sizes in one container reduce the landed cost for distributors and fabricators. Our technical team supports grade and size selection, and regular supply programs keep fabrication schedules on track.

How to Order

Ordering is straightforward: (1) send your specification – standard, grade, size range, quantity, destination city or port and required documents; (2) our engineers confirm the correct grade and size, check GOST equivalents if needed and issue a firm offer within 24 hours; (3) after confirmation we book production on the corresponding line (15-25 days for standard items); (4) we arrange independent inspection if required and load the container or vessel with a full packing list; (5) you receive the MTC, ST-1, invoice and shipping documents by email on the day of departure, and our team tracks the cargo until it reaches your warehouse. First orders can be combined with a trial container of several product lines, and long-term partners receive preferential pricing and fixed-price contracts.

Frequently Asked Questions

Related Products

• Equal Angle Steel 20x20x3 mm
• Equal Angle Steel 40x40x4 mm
• Equal Angle Steel 63x63x5 mm
• Equal Angle Steel 100x100x10 mm

← Back to Equal Angle Steel category

Factory-Direct Sourcing for the Russian and CIS Market

Equal Angle Steel 50x50x5 mm is available for direct import into Russia and Central Asia under a transparent procurement process. Our export desk confirms the specification, grades and GOST equivalence within 24 hours, issues a firm offer on FOB, CFR, CIF or DAP terms, and prepares the complete export documentation set – MTC per EN 10204 3.1 with heat numbers, Certificate of Origin form ST-1 for duty-free EAEU import, commercial invoice, packing list and bill of lading or railway consignment note – so your customs broker clears the cargo without delays. Payment terms include T/T with 30% deposit, irrevocable letters of credit, and credit terms for established partners. For distributors and project buyers we consolidate several product lines in one container, provide cargo tracking through our logistics desk, and support the EAC certification process under the EAEU Technical Regulations where the project requires it. First orders can be arranged as trial shipments so your quality department can verify the material and the documentation before committing to volume supply, and regular buyers benefit from fixed-price contracts for the period of the agreement.